I have a very short project attention span. If it takes more than a week, count me out. This couch project was started in August. Yes, August. it sat at various stages of completion for a month or two at a time.
The Process:
Step 1: Pick out all the seams of the back cushions to remove them from the couch.
Step 2: Pick out all the zippers (I needed them)
Step 3: use a bread knife to slice through the middle of all the bottom cushions.
Step 4: cut new 2" high density foam to size
Step 5: Use spray adhesize to stick the new foam in the center of the old cushion. (you can see this in the picture below)
Step 6: Cut new cotton batting to size
Step 7: use spray adheisive to cover the bottom cushions in the new batting. (I did all the spray adheisive stuff out on the grass on a large drop cloth. And yes, I spent a good 30 minutes picking cotton batting off my fingertips afterwards)
Step 8: Make new covers for the cushions out of a large white sheet. (this is to protect the batting when the real covers are removed, and then put back on)
Step 9: Cut foam to the size of the back cushions.
Step 10: Cut new cotton batting to size.
Step 10: Adhear the foam on the back of the cushions and then wrap with new cotton batting all around.
Step 11: Make covers for the back cushions out of a sheet.
Step 12: (See! We're already on step 12 and we haven't even started the REAL covers yet! This is not my kind of project, I should have known this). - Cut a bunch of 2" strips of white canvas on the bias and sew like 1,000 yards of piping.
Step 13: Make covers for the bottom cushions out of sturdy white canvas.
Step 14: Try them of, for fit.
Step 15: Realize that you totally made them about 1" too big all around (I'm not good estimating seam allowance).
Step 16: Pick out all the stitching.
Step 17: Do it over.
Step 18: Repeat with all the bottom cushions and top cushions except one (leaving out steps 15-17 for the last 3 cushions)
Step 19: Let it sit for a couple months, just mocking you.
Step 20: finally get around to finishing that last back cushion.
Step 21: cut out all the pieces for the couch base.
Step 22: lay it over the couch with the wrong side facing you and pin it all together.
Step 23: Sew, Sew, Sew (this part went surprisingly fast.
Step 24: put it on. ENJOY THE GLORY OF A FINISHED PROJECT.
This is what it looked like during the first stage: UGLY, and messy.
and TA-DA!
For anyone thinking that this is a great DIY project, a few words:
1. only attempt this if your couch is really sturdy. Ours, though ugly, and about 25 years old, have a really strong frames which have lifetime warrenties.
2. if you don't have to, skip the insanity involved with re-doing all the cushions. this was, by far the hardest and longest part, but for us, makes all the difference.
3. Cost - redoing the cushions- about $80. Fabric & Piping: $100. Needles - like 50 (i broke a LOT).
All in all, I am so happy with it, and I am really proud of myself for finishing it, and doing it. This was my first attempt and I was really terrified of doing it without my mom (a master seamstress and upholsterer), and I DID IT! On to the next unfinished project!